|
|
|
|
|
|
HomeOxygen SensorsBosch 15716 Oxygen Sensor |
|
|  | | | Customer Reviews: | | | Average Customer Review: ( 10 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
5 of 5 found the following review helpful:
 Bosh 15716 Sensor Feb 23, 2008
By Dan Ngoc Le
It's an O2 sensor, how hard could it be to make? The product would flawless as if it were OEM. Bosch still has not let me down, despite many bad reviews I have read about them! Price was around 40 bucks per sensor for me, which is reasonable seeing that Ford wants around 100 bucks for the NGK products (rolls eyes)!
2 of 2 found the following review helpful:
Exact fit May 14, 2010
By RobertL
Bought this a year ago here at Amazon.com and finally got around to installing it in my 1991 F150 based on age and mileage (97k). It fit just fine and the cable was an exact fit for the OEM harness. Surprisingly, the old one came out fairly easy with a warmed-up exhaust, 7/8" open-end wrench, a little PB blaster, and a couple of taps from a rubber hammer to get it started. Only issue was the threads in the exhaust got a little dinged up, but a quick run to Autozone for an Oxygen Sensor Thread Chaser ($9.99) solved that problem. I also added more anti-seize to the threads on the sensor as what came with it seemed a little sparse ... not that I ever plan to remove it.
2 of 2 found the following review helpful:
Worked great! Nov 09, 2009
By C. Jones
I changed all four on my Mustang and they worked great. At a fraction of the part store price...
1 of 1 found the following review helpful:
Why buy the universal fit store brand? Nov 09, 2011
By PMN357
My local parts store wanted more for one of these than I paid for two of them from Amazon and that includes shipping. Worse yet, the parts store wanted to sell me their store brand universal type that require you to splice on your old connector. These Bosch sensors are higher quality and come with the proper OE dongle attached. They have anti-seize thread compound already applied to the threads but be careful when you take the protective caps off. You don't want to get any of that compound on the sensor itself.
I've had very good luck with Bosch products in the past and this is no exception. High quality parts at a great price and fast Amazon shipping gets five stars.
Great deal! Aug 25, 2011
By 5oCobra
Have a 95 cobra picked these up for a fraction of the motorcraft ones (the same) installed and after the computer started getting the readings my mpg jumped by about 2, better idle, and had a nice rev happy engine again..
Anyone with about 60-100k on their car will see benifits from installing new 02 sensors.
See all 10 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
Atmosphere Solutions